Life cycle assessment on environmental feasibility of microalgae-based wastewater treatment for shrimp recirculating aquaculture systems.

This life cycle assessment (LCA) study analyzed the environmental consequences of integrating microalgae-based wastewater treatment into a shrimp farm with recirculating aquaculture systems (RAS). Microalgae treatment produced <10 % of the system's freshwater eutrophication potential (FEP), marine eutrophication potential (MEP) and global warming potential, which was dominantly contributed by electricity use. Microalgae treatment performed comparably to activated sludge treatment for FEP reduction, and was more effective in remediating marine eutrophication. Replacing coal in electricity mix, particularly with renewables, reduced the system's impacts by up to 90-99 %. Performing the LCA based on system expansion generally obtained higher impacts compared to allocation. Utilizing algal biomass for biogas production reduced the MEP; however, production of feed ingredient and biodiesel were not environmentally beneficial. This study proved the use of microalgae for aquaculture wastewater treatment to be environmentally feasible, the results can guide more sustainable RAS operations and design of full-scale microalgae treatment.

Life cycle assessment on marine aquaponic production of shrimp, red orache, minutina and okahajiki.

Aquaponics is an integrated food production system that intensively produces a diverse array of seafood and specialty crops in one closed-loop system, which is a potential solution to global challenges of food security. While current aquaponics systems are commonly operated with freshwater, marine aquaponics is an emerging opportunity to grow saltwater animals and plants. Although marine aquaponics can reduce the dependence on freshwater for food production, its environmental sustainability has not been systematically studied. This paper presents the first life cycle assessment (LCA) on a marine aquaponic production system growing shrimp and three halophytes. The system assessed covered from shrimp larvae nursery to grow-out. The effects of salinity, carbon/nitrogen (C/N) ratio and shrimp-to-plant stocking density ratio of aquaponics on its midpoint and endpoint environmental impacts were evaluated using a functional unit based on the economic value of the four products. Electricity use for aquaponic operation was the environmental hotspot, contributing ∼90 % to all the midpoint impacts. The system produced higher environmental impacts when operated at higher salinity, but lower C/N ratio and stocking density. Replacing fossil fuel with wind power for electricity generation can decrease the environmental impacts by 95-99 %. Variation in the shrimp price can change the impacts by up to 62 %. This study provides a useful tool to help marine aquaponic farmers improve their production from an environmental perspective, and can serve as groundwork for further assessing more marine aquaponic systems with different animal-plant combinations.

Microbubble-Assisted Cleaning-in-Place Process for Ultrafiltration System and Its Environmental Performance.

Membrane filtration is a key technology in dairy processing for the separation of dairy liquids to clarify, concentrate, and fractionate a variety of dairy products. Ultrafiltration (UF) is widely applied for whey separation, protein concentration and standardization, and lactose-free milk production, though its performance can be hindered by membrane fouling. As an automated cleaning process commonly used in the food and beverage industries, cleaning in place (CIP) uses large amounts of water, chemicals, and energy, resulting in significant environmental impacts. This study introduced micron-scale air-filled bubbles (microbubbles; MBs) with mean diameters smaller than 5 µm into cleaning liquids to clean a pilot-scale UF system. During the UF of model milk for concentration, cake formation was identified as the dominant membrane fouling mechanism. The MB-assisted CIP process was conducted at two bubble number densities (2021 and 10,569 bubbles per mL of cleaning liquid) and two flow rates (130 and 190 L/min). For all the cleaning conditions tested, MB addition largely increased the membrane flux recovery by 31-72%; however, the effects of bubble density and flow rate were insignificant. Alkaline wash was found to be the main step in removing proteinaceous foulant from the UF membrane, though MBs did not show a significant effect on the removal due to the operational uncertainty of the pilot-scale system. The environmental benefits of MB incorporation were quantified by a comparative life cycle assessment and the results indicated that MB-assisted CIP had up to 37% lower environmental impact than control CIP. This is the first study incorporating MBs into a full CIP cycle at the pilot scale and proving their effectiveness in enhancing membrane cleaning. This novel CIP process can help reduce water and energy use in dairy processing and improve the environmental sustainability of the dairy industry.